SALCA

SALCA was created to answer two of boaters' major problems in one effective and affordable product. It combines a sacrificial anode with a stainless steel disc line cutting blade, thereby offering both corrosion and entanglement protection simultaneously. It has successfully been put through a battery of tests to meet all the demands of meticulous boaters.

SALCA is particularly useful for limited clearance areas, where there may not be enough space to install separate anode and line cutter. SALCA can compliment your traditional line cutter and give additional cutting protection

SALCA works as a sacrificial anode, naturally eroding while protecting the expensive metal components of your boat. Upon reaching approximately 50% of its original size, the entire unit should be replaced with a new SALCA providing continued corrosion control with a new line cutting blade.

SALCA is much more affordable than your traditional line cutter, but does not sacrifice durability for savings.It has been proven to endure several tons of pressure without separating the blade from the anode. The anode also provides corrosion protection to the stainless steel line cutter blade. SALCA installation is a simple process that can be carried out by you, your mechanic or your diver. SALCA can be installed on either side of the strut, with the blade facing the bearing. It can also be installed at the aft of the boat's strut between the prop and strut or cutless bearing.